Bio-Burden Reduction Grade PES Mini Filter Cartridge

Memsep Filtration is a manufacturer with 10 years of experience in producing filter cartridges and has the ability to independently design products and production lines. For a long time, we have been supplying clients worldwide with filter cartridges made of various materials, including PP, PES, PTFE, and Nylon, among others.

The Biodegradable Grade Filter polyethersulfone primary cartridge is 100% integrity tested; it ensures the removal of bioburden and small particles from a wide range of food and beverage, biological fluids, and intermediate bulk pharmaceutical fluids. The cartridges consist of a single hydrophilic, asymmetric polyethersulfone membrane that provides broad chemical compatibility, high flow rates at low pressure drop, and low extractables. Mini-Cartridges are available with a minimum pore size of 0.2µm and filtration areas of 500cm^2, 1000cm^2, 1500cm^2 , 2000cm^2. If you want to know more about Bio-Burden Reduction Grade PES Mini Filter Cartridge, please contact us.

Typical Applications

·Cell Culture Media

·Large Volume Parenterals (LVP's)

·Pharmaceutical Bulk Chemical Solutions

·Diagnostics

·Blood and Serum Fractions

·Purified Water

·Beer,Wine and Spirits

·Juice & Soft Drinks

·Bottled Water

Integrity Test Specifications

Water wetted membrane

Construction Materials

Filter Membrane:Polyethersulfone (PES) Membrane

Media Support:Polypropylene

End Caps:Polypropylene

Inner Core:Polypropylene

Outer Cage:Polypropylene

Sealing Method: Thermal Bonding

O-rings:Buna,Viton(or FKM),EP,Silicone,

Encapsulated Silicone,

Encapsulated Viton (or FKM)

Maximum Operating Parameters

Differential Pressure

·Forward 50 psid (3.4 bard) at 20℃(68 °℉)

· Reverse 40 psid (2.7 bard) at 20℃(68 °℉)

Operating Temperature 82 ℃(180 °℉) at 10 psid(0.69 barg)in water

Recommended Changeout Pressure:35psid(2.4barg)

Filter Area:

H:500cm^2 S:1000cm^2

D:1500cm^2 L:2000cm^2

Toxicity

All components meet the specifications for biological safety per USP Class VI-121C for plastics.

Sanitization/Sterilization

Filtered Hot Water 90 ℃(194 °℉), 30 minutes, multiple

cycles, max 3 psid forward flow

Autoclave 121℃ (250 °℉), 30 min,multiple cycles

In-line Steam 135 ℃(275 °℉), 30 min,multiple cycles

Food Safety Compliance

Materials of construction comply with FDA regulations for food and beverage contact use as detailed in the US Code of Federal Regulations,21CFR.

Materials used to produce filter media and hardware are safe for use in contact with foodstuffs in accordance with EU Directives 10/2011

odder：